Jim rumsby
New member
I’ve got a Coronet N03 in my nans she’s but I have no experience in these at all it’s all I’m working condition etc do anyone have an idea roughly what I should put this up for on eBay? Thank you in advance.
Coronet N03 lathe
- Thread starter Jim rumsby
- Start date
Help Support UKworkshop.co.uk:
Phil Pascoe
Established Member
99p.
Jim rumsby
New member
Why?
Phil Pascoe
Established Member
It'll what it'll fetch no matter where it starts.
SVB
Established Member
Best bet is to do a search on RP lathes on ebay then in the filters you can select the finished auctions to get a feel.
Often the accessories and central location are more important price drivers than the actual lathe itself so very difficult to give you a reliable price with the info provided and all most could do is the ebay search I described above.
Other options could be local turning clubs (search AWGB site) although not sure price will be much higher (much smaller but more focused & informed audience) and timescales to sell could be longer.
Often the accessories and central location are more important price drivers than the actual lathe itself so very difficult to give you a reliable price with the info provided and all most could do is the ebay search I described above.
Other options could be local turning clubs (search AWGB site) although not sure price will be much higher (much smaller but more focused & informed audience) and timescales to sell could be longer.
timber
Established Member
Hi
Are the bed bars solid or chrome plated hollow. ??---a quick look at the ends will tell'
I have one and mine are hollow, a great little lathe.
I bought mine in an un-used codition, and have 5 Coronet stamped chisels that have never been used My set up had been stored carefully all the chisels wrapped up, however a bit of rust on the lathe bars.
I gave £150 for just the lathe , and I might add far too much for the chisels.!!??
Bought mine off preloved site
Are the bed bars solid or chrome plated hollow. ??---a quick look at the ends will tell'
I have one and mine are hollow, a great little lathe.
I bought mine in an un-used codition, and have 5 Coronet stamped chisels that have never been used My set up had been stored carefully all the chisels wrapped up, however a bit of rust on the lathe bars.
I gave £150 for just the lathe , and I might add far too much for the chisels.!!??
Bought mine off preloved site
hawkeyefxr
Established Member
When you find the price you want can you contact me pls. A friend of mine's son wants a a lathe, he went to a centre and did a little bit of tuning under tuition and he is hooked. This lathe may well suit him for a start.
cheers
cheers
hawkeyefxr
Established Member
Jim rumsby":3sbb7tmr said:
Forgot to ask are there any parts with it like a chuck?
Phil Pascoe
Established Member
ebay. 99p.
Similar threads
