This is the second and final installment of my Bird Table project which I am submitting for the competition. Hopefully in the beginners section.
All the roof supports are now fitted as is the mounting piece on the back. This will be used to fix the table onto the fence post. The two back rails sit in shallow housings. I have also made and attached a brace which can be seen used at the moment to hold the table in the vice.
The roof is to be made of several strips of Iroko. The top pieces on each side have now been attached as have the side trim. Gorilla glue and pins have been used here.
The completed roof. 5 strips of Iroko on each side.
And from the inside.
The table is complete. The finish is several coats of Danish Oil. I have attached it temporarily to my own fence to photograph it.
That completes my submission for the competition, hope you like it.
All the roof supports are now fitted as is the mounting piece on the back. This will be used to fix the table onto the fence post. The two back rails sit in shallow housings. I have also made and attached a brace which can be seen used at the moment to hold the table in the vice.
The roof is to be made of several strips of Iroko. The top pieces on each side have now been attached as have the side trim. Gorilla glue and pins have been used here.
The completed roof. 5 strips of Iroko on each side.
And from the inside.
The table is complete. The finish is several coats of Danish Oil. I have attached it temporarily to my own fence to photograph it.
That completes my submission for the competition, hope you like it.