bendy 'stick' that holds its shape - for metalwork

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nev

Established Member
Joined
21 Jan 2011
Messages
4,860
Reaction score
16
Location
The green and wetter end of the M4.
Is there such a thing and if so what's it called?
I'm trying to mock up, not so much a template, but an example to follow of bended(?) metal tube to make some engine guard / crash bars for a bike.
Currently using 5 or 6mm bar which works to a point but deforms a bit too much when re shaping after bending too much etc.
The final product will be 25mm-ish tube which I can bend in work on the rollers.

I've seen flexi rulers but is there a cunning device that I've missed?
 
This might do the job - look up POWERTEC 71056 Flexible Curve Template on Amazon

The alternative is one of these, I think you can get shorter ones as well. You have to screw them down so not sure if it would work for what you want, “CMT TMP-1200 Flexible Template for Curved and Arched Routing, 15/32 X 15/32-Inch”
 
Boatbuilders use a sort of pattern that looks a bit like a huge bicykle chain made from short flat bars screwed together. That pattern is used for roughing out sawn frames to be fitted into an already planked clinker hull. Unfortunately I do not know what it is called in Englesh but in Swedish we say "ledmall".
 
What about joining several flexible coolant pipes together ?
Its whether they are stiff enough to hold their shape though...

Sent from my SM-G960F using Tapatalk
 
Cheers folks.

I think Coley may have nailed with the pipes as they'll go '3D' and if all else fails I can use them in work for their intended purposes afterwards.

Thanks again for the suggestions.
 

Latest posts

Back
Top