Axminster Hand Tools Event

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joiner_sim

Established Member
Joined
7 Jun 2007
Messages
1,751
Reaction score
0
Location
Staffordshire
If you don't get the Axminster email here's what I recieved today:

We would very much like to invite you to our FREE hand tools event, Talking Tools, which is taking place here in the Guildhall, Axminster on Friday 25th (10am-4pm) and Saturday 26th March (10am-3pm).

The event will have a real international feel to it and feature some of the world's finest hand tools from England, USA, Canada, Sweden and Japan.

There will be demonstrations from well-known hand tool specialists -


Thomas Lie-
Nielsen and Deneb Puchalski from Maine, USA. Terry Saunders, product designer with Veritas from Ottawa, Canada. Master craftsman, Hiroshi Morita representing Ice Bear from Japan

- plus inspirational cabinet makers and woodworking experts from the UK...
•Robert Ingham
•David Charlesworth
•John Lloyd (Sat only)
•Tom Kealy
And, our own in-house demonstrators including Jason Breach, Trevor Yates and Colwin Way. Click for more info...


Other brands featured:
•Clico - makers of globally famous planes
•Crown Tools - traditional tools from Sheffield
•Bosch - a household name for power tools
•Festool - quality high spec German power tools

•Lamello - Swiss, clever and innovative jointing
•Tormek - Swedish made number one sharpening system worldwide
•Wetterlings - makers of fine Swedish axes

This really is a unique opportunity to see some of the world's finest craftsmen in action and learn more first hand about the techniques they use. For more detailed information about Talking Tools please visit http://www.axminster.co.uk/talkingtools

PS. If you are not able to make it to the Guildhall in Axminster, we are also holding a mini version
of Talking Tools at our Nuneaton store on Saturday 2nd April. Click here for more information
 
I tried moving the mountain to get there, but can't make it. A lot of hand tool goodness and expertise concentrated in one place, and for free? A no brainer, if you can make it. Too bad about the noise makers like Bosch and Festoy, but you can't have everything... ;)
 
I may go down as it's just down the road, suppose I might as well see what all this hand tool fuss is about :lol:

If there is a good number going from here I'll get along for a meet up
 
The problem for me is that the annual Yandles outing follows on very shorty in April. Were I even to merely suggest to SWIMBO that the Ax HT event might be 'worth going to' :-" and then mention in the same breath that I'll be going to Yandles bun fight the following weekend(?) the chances of me surviving the encounter are slim to remote :(
If it's anything like the Rycotewood event last year, it will be worth going to, especially if you're a newcomer to the cordless side, but I'll probably pass and go to Yandles instead, which for me is a better show...and it's also free! - Rob
 
I think I may take the risk and see if I can get away with going to both!! Probably on the Friday as Saturdays are spoken for.
 
woodbloke":2qk3e5bw said:
Were I even to merely suggest to SWIMBO that the Ax HT event might be 'worth going to' :-" and then mention in the same breath that I'll be going to Yandles bun fight the following weekend


Rob, there is a weekend in between the 2 events, surely time enough during that weekend to amass sufficient brownie points to attend both outings 8-[
 
Quote from Rob Lee over at WoodNet, if anyone needs an extra incentive to go. (Take a camera, please...)

Rob Lee":23b1awlk said:
Terry's (designer) next design is in pre-production right now... we'll be taking it (and some other "stuff") to the "Talking Tools" shown in the UK in a couple of weeks....
 

Latest posts

Back
Top