Aluminium Tablesaw top wax?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mark18PLL

Established Member
Joined
15 Mar 2020
Messages
299
Reaction score
36
Location
Lancashire
I have purchased a new table saw which has an aluminium table, what would you recommend using to protect it and help material glide better? I have read things like Glidecote are good but cant find it in uk.

Cheers
 
I would add that when I bought my new bandsaw with a cast iron table I wiped over a coat of AF50 then buffed on a coat of Axminster Machine Wax but I doubt you need the Af50 for an aluminium top.
 
I would add that when I bought my new bandsaw with a cast iron table I wiped over a coat of AF50 then buffed on a coat of Axminster Machine Wax but I doubt you need the Af50 for an aluminium top.
Yes, i think that might be wasted on aluminium. Thanks for the help its much appreciated 👍🏻
 
I have an evolution table saw with an ali top. Just give it a couple of squirts of dry PTFE spray. Works for me
 

Latest posts

Back
Top