Search results

This pillar drill as in photos is available to any one who wants to come and collect it. I will make space around it and can lend you some spanners to take it apart. That's it. Don't ask me to carry it, load it, lift it. It works and is very heavy. Comes apart into three bits Yours for free.

I no longer do wood work for health reasons, so I have for sale a joint genie as in the photos. What is in the photo you get except the black drill bit which is in the bin. This is the 8mm dowel size, the long bar is 9" and the short bar is 4 1/4". This has been used quite a bit. There are no...

For sale are four Vee tool carving tools to be sold individually or otherwise. they are:- Pfiel 12/14 - This has had very little use and is quite a large vee tool. Bought new by me. Asking £17.00 inc p&p. {SOLD} Pfiel 12/6 - This has been use a lot. Sharpened to 20 degrees approx. Bought new...

A set of medium size tools by Henry Taylor. These have been used by me and are sharpened to 20 degrees approx. Five tools in the set , which are N0.1- 6mm ; fishtail 6mm; 3 x gouges 8mm (steep, medium, shallow); Note no sizes stamped on the tools. Asking £45.00 inc p&p. Direct transfer or...

I have for sale the following books and DVD I no longer have use for. DVD- Introduction to chip carving - Murry Taylor -£7.00 + £2.00 p&p Books:- Practical wood carving and gilding - Wheeler - £4.00 + £2.00 p&p Chip carving workbook - Dennis Moore - £5.00 +£3.00 p&p Complete guide to chip...

I have for sale the following Pfeil carving gouges that I no longer use. My initials has been burnt into the handles. These gouges have been used by me and were bought new by me. Sizes are: 2/18 :9/10 :7/14 :5/5. Asking price £50.00 plus £4.00 p&p Payment by direct transfer or Paypal or come and...

I have for sale four two cherries wood carving gouges that I not longer use. They were bought by me new at various times and have been used. They have been sharpened to about 20 degrees. They are as in the photos and the sizes are:- No.3 x 14 No.9 x 3 No.7 x 12 No.9 x 10 They all have my...

I am getting rid of carving tools I no longer use. Four Ashley Isles full size tools. They are 54 x 5 18mm fishtail 54 x 3 15mm fishtail 54 x 1 15mm fishtail no numbers but look like 3 18mm fishtail All sharpened to 20 degree except the flat chisel where there is two bevels one on each side. My...

Cole Jaws 120mm radius. Will fit SC4, SC3 chucks. These have been used by me a lot. I no longer do wood working. What you see is what is for sale. Asking £10.00 plus £3.00 postage or come and collect them and be more than welcome.

This post is fumbling around because I am seeking advice and guidance on something from a very long time ago. I cannot do woodworking because of reaction to sawdust so I am looking to do copper work in the form of goblets, bowls and vessels. When in school many , many years ago I can remember...

Bought new April 2018 from Axminster. No longer being used. Comes with some spare bags and is as in the photos. I must point out that the inlet spider's web has been cut out, as it was blocking often with the planer thicknesser. It works great now. This is collect only from Ammanford Area. I...

I am selling my record band saw as I am not using it these days. It was bought new in 2007 (I think) and been used in my workshop (garage) mainly for deepening timber for using on the fretsaw. It is in working order with no faults to the best of my knowledge. The only job I had to do is change...

Biscuit cutter Lamello C3 as in photos. This has been used in a home workshop. What's in the photos is it, no biscuits. This is the original box it came in. I am slowly getting rid of kit that I don't use. I spend a lot less time in the shed these days. I cannot remember when I bought it but I...

When making a dovetail box 200mm x 125mm x 100mm (lxwxh), which board should be to the front, tail or pin board. I have made both, they all look ok to me. So what would be the more traditional look. thanks, Jestyn

Henry Taylor 1" round nose scraper, Part no. hs27. Price is £15 plus £5.75 postage/package. Sorby 3/4" HSS oval skew. Price £20.00 plus £5.75 postage/package. Crown 1/2" HSS bowl gouge Price £25.00 plus £5.75 postage/package. Payment by direct transfer, Paypal (friends and Family) or cash.

Nova 3000 lathe with stand. To avoid doubt the spindle size is 30 x 3.5mm. The lathe is sold with standard equipment, no chuck etc. The head stock guard has been taken off because I found it difficult to change the speed with my not so agile fingers. I put the screw for the guard in a safe place...

This is a D4 jig with additional templates for multiple mortise. I have used this in the past but has stood idle for some time now. The only cutters I have are those in the pictures, nor do I have the screw driver with the square end. There is one stud missing from one of the fingers. Collection...

All are Ashley Iles and are gouges that I do not use often these days. The tools are:- No. 9 x 8mm No. 10 x 10mm No. 5 x 16mm No. 6 x10mm No. 9 x 16mm No. 39 x 6mm ( V-tool) All measurements approx. My initials are burnt onto the handles and one has them stamped. I would like £60 for the lot...

This is the 2015 model, I cannot find a lot of comments about it. Has any one bought and use this saw and if so what is their opinion? In particular is it accurate and does it hold its accuracy. It will be used in the shed for general work as long as it is not too cold. thank you

Hello, I am looking for a sharpening system for both lathe and carving work. Has any member used the Sorby Proedge system for sharpening carving tools. In all the videos I have seen, its always turning tools that are sharpened. The sanding belt travels toward you and are unsure about using this...