i'll take some of the offcuts off your hands as long as they fit in the back of an estate car. only live over the bridge in glazebrook. i have a wood burning stove so can always use any off cuts
let me know
cheers
mark
i also get this on my jet jpt-260 - really looking forward to you finding a solution
my infeed/outfeed table appear parallel and the outfeed table is slightly lower than the planer blades at the highest point.
i have several tapered boards now...................
because this is a 'friendly' forum and i don't think we should be making money selling tools between each other? i sold it at a good price to a fellow member instead of putting it on Ebay and possibly selling it for more.
sorry if you disagree.
you can get a festool bs 75e for about £200 if you don't go for the systainer, etc (think mine was £210)
it is way better than the dewalt it replaced - DW433
only 75mm though not 100mm as requested
mine was fine with a 16 amp breaker to start with and now it keeps tripping (in winter)
i have tried a type c breaker - still trips though!
jet have sent me a replacement motor to try - could this just be damp, pretty damp garage? don't want to change the motor if it's damp...
sorry for the...
i had the same problem on my 260, called Jet (Brimarc) and they sent me instructions - you need to take the cover of, etc....
i have the e-mail at work if you need it, will be monday though
i've not bothered yet............
we have used it in our new office (architects) in the restaurant. the block sizes are aprox 35mm x 75mm - they come linked together and you lay a strip of about 9, bonded down to ply with special adhesive. then the joints are filled and sanded.
we have approx 300 sq mt of it - so it can be done...