I often see Americans using Scotch Brite pan scourers as a "sanding option".
I tried this but the ones I used were green and some colour transferred to the wood!
I then noticed that one of the Americans was talking about grey Scotch Brite which, I guess, would not be such a problem?
I can't find...
I am painting some cabinet doors and always have a problem. I've done all the prep, primer, etc.
I tend to paint the backs and let them dry then I paint the front and the edges.
The problem is that there is always a little over-run from the edges to the back no matter how careful I am.
I wipe...
I am about to fit H-hinges to doors that fit inside the face frame of a cabinet and sit flush with the frame. The gap around the door has to be consistent all round or it will be noticeable.
With the best will in the world, hinges are never 100% stable and tend to sag under weight. So, I can...
Hi,
I want to buy a scroll saw book for a woodworker who is new to scroll saws but an accomplished turner and therefore not a total "woodworking beginner".
Any recommendations please?
Thanks
On the built-in cabinet I'm currently approaching there will be two flush doors with "H" hinges. All good.
However, I've just realised that the magnetic catches I have (normal type) will not work because they need to be screwed to the top of a cabinet. As the doors are flush and in the face of...
Thanks all. I'm thinking that I want accuracy of cut for the mortices and so maybe a proper motriser is best.
I could use one of those hand-held jobs as a cheap pillar? Are they ok?
If I have to buy two I need a good deal. Any help on that please?