Will my milling machine run this cutter?

[adidat]

So I have a very similar machine to this, cheap little thing £50 of the bay.

I recently acquired this facing cutter, its fairly large at 14" across and 2" thick it weighs about 40kg. :shock: :shock: But for the life of me I cant figure out how to get the machine to accept it???

Any ideas???

Adidat :lol: :lol: :lol:

 

[monkeybiter]

Using hot glue fix the miller down on top of the cutter, then stick an LED light on top of that, make a lamp shade out of dirty pallet wood and 'voila!', you have an industrial chic coffee table lamp. (hammer)

 

[MusicMan]

Nope!

 

[Rorschach]

Silly! Of course it won't work, you need a horizontal mill for that :twisted:

 

[novocaine]

on god, please don't even try it.

it's missing teeth, sort that first, then use an adapter, I think banggood will sell what you need.

 

[Inspector]

Silly! Of course it won't work, you need a horizontal mill for that :twisted:

Bolt the base to the wall. Voila! Horizontal mill. :wink:

Pete

 

[TFrench]

I'd love to see something that size working!

 

[julianf]

Dont you have a bench grinder that would fit it?

....where there's a will there's a way! : )

 

[Setch]

....where there's a will there's a way! : )

And on that note, maybe write a will before you spin it up to speed....

 

[adidat]

It's been suggested I could jack the van up and run it in place of a wheel. Bolt the work piece to the floor and I have a perfect curve cutter. Just turn the steering wheel!

Adidat (homer)

 

[monkeybiter]

It's been suggested I could jack the van up and run it in place of a wheel. Bolt the work piece to the floor and I have a perfect curve cutter. Just turn the steering wheel!

Adidat (homer)

I think you mean 'a perfect cove cutter'. :wink: