Moderators: Random Orbital Bob, nev, Noel, Charley, CHJ

 Reply
By topconker
#1199160
Need to fit an iron holder onto back of a hollow door.
I know it's not the best but have used "Sticks like s**T" which hold it quite easily.
However, for peace of mind I'd like to fit a couple of screws to the holder so looking for any recommendations for fixings?
By skelph
#1199175
In the dim and distant past we found the best type of hollow door fixings were ones like this as the plastic ones didn't always work properly -
https://www.amazon.co.uk/Basic-24596-Hollow-Fixing-M4X20Mm/dp/B005346TL2/ref=sr_1_9?ie=UTF8&qid=1515511657&sr=8-9&keywords=hollow+door+fixings (sorry about length of link :oops: )
The fixing stays in place even when screw removed.
Hope this helps,
skelph
By Aden30mm
#1199289
I would highly recommend the use of a setting tool when installing the metal plaster board/hollow door fasteners.