Yew & Flame Maple Guitar [Completed]

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ByronBlack

Established Member
Joined
4 Sep 2005
Messages
4,117
Reaction score
1
Location
Thurrock, Essex
I started with some previous pictures of this build a long time ago with my previous guitar, but seeing as the photos were missing from that old thread, I thought it best to start a fresh one just for this project.

Here's the WIP shots up to current time:


2964218917_c2eb16e650.jpg


2964219213_e035fea462.jpg


2964219979_95318786ab.jpg


2964217959_cf1fbbba17.jpg


2964218613_3db1bc02fe.jpg


2965059682_2fb0a59b6d.jpg


2964217577_e7e59a7f57.jpg


2964222179_f8a235c5e4.jpg


2964220557_c893c61731.jpg


So there we are, today saw the routing of the electronics cavity, tomorrow will see the boring for the string-through ferrules and the tune-o-matic bridge studs and the jack connector.

After that, it's just got to be sanded all over, and the first spay of paint can go on (solid black for the back of the body and neck. The headstock will also be black). The flame maple will be picked out by black dye and then sanding back, and after that it'll be ready for the clear coat.
 
Looking good, are you going to be spraying your finish and if so what and how? I'd love to spray my own but will only do so if it looks pro.

PS - might have found somewhere in the UK that does the 3M stikit rolls, just need to get in touch with them to ask
 
Philly - I'm undecided on the horns. I designed it for as it is now, but it has crossed my mind to do some more work on them, I'll have to mull that over some more

Pete - Plasterboard/plyboard, it's somewhere on my 'to do' list, I should be doing a part of it this weekend hopefully.

Damian - This will be a spray finish. I'm using Behlen's 'Top Coat Lacquer' spray can finish, and also their coloured dyes. I've not settled on a brand yet for the solid black. It is indeed straight forward to get a pro finish using spray cans - have a look at the article I linked to recently on your guitar thread, Dan Erlwine shows you how to use spray-can nitro and dyes to finish a guitar, the results are superb. I hope mine comes out as well.

Here's the link to the Behlen product: http://www.behlen.co.uk/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=AERFINISHING
 
Pete, this is available now (or was at the time of buying), I've got 4 cans sitting right here in front of me which I've had for the last few months.
 
The finishing process has started in earnest for this project.

Some pics:

Faux binding and maple top taped up
3028026706_8772ea45ab.jpg


Control cavity and string-through holes taped up, and sanded to 400grit
3027197199_33c90cee46.jpg


My makeshift spraying arrangement
3028030628_186b40c03f.jpg


4 coats of sanding-sealer. A couple more coats are to go on yet.
3027196939_4ed1e49e00.jpg


So there we are. The solid colour (black) will be spraying tomorrow, when that is done, the front-maple section will be dyed and sanding back ready for the all-over clear coat.
 
Just got in after putting on some colour coats.

Scuff-sanded the sanding sealer
3028152114_b3f526eb10.jpg


Tack-clothed ready for color coating
3027318191_81674c5e30.jpg


First coat of black
3027319113_1f20cd94bd.jpg


Different angle
3027318677_029d95058c.jpg


Last one
3028151630_b3628306b8.jpg


I'll be applying at least another 3 coats of the colour and then onto the dying and clear stage. Despite the cold-weather it's going on well with no orange-peel.
 
Looks good, nice pro job.

I'll get some pics of mine up, though you'll struggle to see much progress, I seem to have spent a lot time jig making :(
 
That looks absolutely fantastic, really looking forward to seeing it finished.

Do you make anything else apart from Instruments?
 
Ironballs - jig making is essential, and well worth the time making them, because when you make the next instrument, it'll be twice as fast and twice as easy.

Waka - I make plenty of other stuff too (time permitting), but lately have concentrated on guitars. (you can find a number of my projects by doing a search with my username - I made a nice little arts and crafts table that was featured in British Woodworking last year).
 
I've finished applying the solid colour today.

3035055241_69780fd8c2.jpg


Tomorrow will see the removal of the masking tape and hopefully there will be a nice crisp edge for the faux-binding, if not, I'll have to make a little scraper to clean up the edges.
 
Cheers phil,

Today was the big unveiling to see if my taping was good enough to give a crisp binding edge. It was also the day to put down the first part of the stain to bring out the flame in the maple. Here are the pics from today:


Mostly a nice edge:
3038934284_d607223d0c_o.jpg



3038934630_489f7744c3.jpg


You can see the fretboard has come out nice and distinct from the black on the hand-side of the neck
3038096261_bf72baa05a.jpg


Headstock has come out nice too
3038933558_d7ea04f444.jpg


The bound edge taped up ready for staining the top
3038095169_7722094a61.jpg


And the first part of the stain: the black brings out the flame nicely
3038095565_a75b65b519.jpg


The stain will be sanded back so that only the stain in the flame portions remain leaving the rest colour of maple, then a clear coat of nitro will be sprayed over the entire guitar and polished to a gloss finish
 

Latest posts

Back
Top