Type II wood chips??

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Scott

Established Member
Joined
18 Oct 2004
Messages
846
Reaction score
0
Was just reading the destructions for my newly arrived Veritas MkII Honing Guide and....


....could someone enlighten me as to what a "Type II wood chip" is :?: :shock:

....assuming of course that it doesn't refer to a roll of wallpaper! :? :)
 
Scott":1fe46n4w said:
....could someone enlighten me as to what a "Type II wood chip" is :?: :shock:
It's the later model with the improved adjuster... :wink: Go here and go to the "Instr" link next to the "2-1/4" Blade, 38° Bevel" at the bottom of the page.

Cheers, Alf
 
Thanks Alf. Is that a common designation/classification for chips or a Veritas one?
 
I believe Mr Lee Snr. uses it in his "definitive" book on sharpening, so it's fairly widely known as well as being something of a Lee Valley thing.

Cheers, Alf
 
Thanks guys. you learn something new every day! :D
 
Frank D.":3mgwtfb4 said:
R Bruce Hoadley uses the term in his book "Understanding Wood" (the first edition came out around 25 years ago).
D'oh! Now I recall that mentioned before; thanks, Frank. Amazingly I don't have either book. :roll:

Cheers, Alf
 
garywayne":1dhcceew said:
Excuse me for butting in, and excuse my ignorance. :oops:
Are you saying that a, "Type II wood chip" is a 38 Deg blade?
ATB Gary.
Hi Gary,

Type II chips are produced by any sufficiently high angle blade be it in a BU or BD plane.

The higher angles simply cause the wood shaving to fold on itself ("break") at the tip of the blade before reaching a chip breaker (in the case of a BD plane).

This in turn limits the amount of tearout, which is caused by the shaving "climbing" the blade/chip breaker and splitting down and forward of the blade before "breaking."
 

Latest posts

Back
Top