Hi All
With full credit to Tony for the design and inspiration in an older post I have recreated his design to help me with some panel work and cutting tenons on my Table Saw (guard removed for photographic purposes). As with Tony's design I have used mainly MDF But I used Beech for the runners and adjuster blocks. My own addition is a cut down steel rule carefully set in the MDF to suit my TS mitre track to allow a semblence of accuracy.
Hope you like it.
With full credit to Tony for the design and inspiration in an older post I have recreated his design to help me with some panel work and cutting tenons on my Table Saw (guard removed for photographic purposes). As with Tony's design I have used mainly MDF But I used Beech for the runners and adjuster blocks. My own addition is a cut down steel rule carefully set in the MDF to suit my TS mitre track to allow a semblence of accuracy.
Hope you like it.
![IMG_0540.jpg](https://proxy.imagearchive.com/42e/42ebfa92ca03a02d2ece00b2a01fb83f.jpg)
![IMG_0541.jpg](https://proxy.imagearchive.com/a59/a5959b4f90acf525091b23ad8e673510.jpg)