SIP 01332 SAW REPLACEMENT

[andycorleone]

Hi, looks like the saw that comes with the SIP 01332 is not very good quality, I'm looking for a thin General Purpose TCT saw and a thin "Blade Reducing Bush" , Any susgetions welcome
Thanks

 

[Steve Maskery]

Do you mean the saw blade? If so, Freud, Freud or Freud.
Cheers
Steve

 

[OLD]

careful with the thin blade the riving knife is quite thick i use summit blades for price and cmt industrial when funds allow ,both work with knife.

 

[andycorleone]

Thanks, Which one should I buy:

CMT TCT Saw Blade General Purpose - 250mm x 3.2mm x 30mm T40

http://www.axminster.co.uk/product-CMT- ... -20040.htm

£34.36

or the:


250mm Dia X 40teeth X 30mm Bore X 2.8mm Kerf > Freud > Part No. LP30M 025

http://www.rutlands.co.uk/cgi-bin/psPro ... 0,1::::17::

£29

 

[linelink]

Thanks, Which one should I buy:

CMT TCT Saw Blade General Purpose - 250mm x 3.2mm x 30mm T40

http://www.axminster.co.uk/product-CMT- ... -20040.htm

£34.36

or the:


250mm Dia X 40teeth X 30mm Bore X 2.8mm Kerf > Freud > Part No. LP30M 025

http://www.rutlands.co.uk/cgi-bin/psPro ... 0,1::::17::

£29

The Freud blade from Rutlands is not for a stationary saw, they do make this blade for a stationary saw, but I can't see it on their website.