devonwoody
Established Member
Got an email in this morning from Woodworking Tips.com and they are showing the Adjustable Taper Jig.
However the cut off piece of timber does not lay on the saw table but drops off at the end of the cut.
So therefore timber is suspended (in mid air or the drop of piece is) is this a safe method of cutting timber on a tablesaw.
I could use the jig to make straight edges on timber with poor edges if taper is set to square.
However the cut off piece of timber does not lay on the saw table but drops off at the end of the cut.
So therefore timber is suspended (in mid air or the drop of piece is) is this a safe method of cutting timber on a tablesaw.
I could use the jig to make straight edges on timber with poor edges if taper is set to square.