J johnny.t. Established Member Joined 29 Oct 2008 Messages 1,714 Reaction score 0 Location Norfolk, near the sea. 22 Jan 2010 #1 Still playing with my new proxxon long nose grinder This is Oak 5" wide with a carved up rim. JT
CHJ Established Member Joined 31 Dec 2004 Messages 20,132 Reaction score 79 Location Cotswolds UK 22 Jan 2010 #2 Nice Crusty Pie look to that piece Johnny, distinctive rim treatment but not too much over the top contrast wise IMO.
Nice Crusty Pie look to that piece Johnny, distinctive rim treatment but not too much over the top contrast wise IMO.
P Paul.J Established Member Joined 27 Sep 2006 Messages 5,754 Reaction score 1 Location Birmingham/England. 22 Jan 2010 #3 Looking good JT Do you do the carving after the bowl is turned or just before you finish it off :?:
J johnny.t. Established Member Joined 29 Oct 2008 Messages 1,714 Reaction score 0 Location Norfolk, near the sea. 23 Jan 2010 #4 Thanks Chas and Paul Crusty pie bowl :lol: Paul, I did the carving after sanding but before reversing to finish the bottom, so that it was still on the lathe and didn't go flying off anywhere! JT
Thanks Chas and Paul Crusty pie bowl :lol: Paul, I did the carving after sanding but before reversing to finish the bottom, so that it was still on the lathe and didn't go flying off anywhere! JT