Mike Wingate
Established Member
Simple ply construction, plenty of areas to clamp and hold. Adjustable angle for head.
Neck carving jig. From Ukulele to bass.
- Thread starter Mike Wingate
- Start date
Help Support UKworkshop.co.uk:
GazPal
Established Member
Nice one Mike 
My neck rig is loosely based upon an H-girder in section with it's heavier end adjacent to a typical neck position, but also has an adjustable headstock pivot like your's. I use mine in much the same manner as a solar and having it set at 90deg to my bench makes it easier to work from all sides without needing to re-set anything.
My neck rig is loosely based upon an H-girder in section with it's heavier end adjacent to a typical neck position, but also has an adjustable headstock pivot like your's. I use mine in much the same manner as a solar and having it set at 90deg to my bench makes it easier to work from all sides without needing to re-set anything.rileytoolworks
Established Member
Excellent Mike.
Consider that idea stolen. :wink:
All the best.
Adam.
Consider that idea stolen. :wink:
All the best.
Adam.
Mike Wingate
Established Member
After a few suggestions, the Mark 2 Device. I installed a T-track and smaller clamp.
Similar threads
