Kreg pocket holes

[rspsteve]

Could i use this system on 12mm ply to make some workshop cabinets and shelves etc , i would use 15mm or 18mm
But have been given 2 sheets of 12mm so would be a shame not to use it.

Thanks in advance

Steve

 

[tool-me-up]

Which system have you got as there is a few, but generally they are adjustable for the material width

 

[Roughcut]

Yes but just need to make sure you are using the correct length screws.

 

[Tinbasher]

Careful setup and the right screws are the key.

I always do a test piece as a little out on the setup and it can go wrong.

 

[Stu_2]

I use the Kreg on 12mm ply all the time. It can be done with the standard insert, but I do use the Micro jig insert with their shoulder less screws (3/4").

 

[rspsteve]

Thanks very much