DaveL
Established Member
Hi Paul,
Here are your pictures, you need to link directly to the .jpg files
Here are your pictures, you need to link directly to the .jpg files
With you there, Jimi - I only got rid of my much modified Consort because I got a VERY cheap Lurem Universal which is still being modified after 20 years regular workjimi43":iex4404z said:Apart from the VERY expensive kit around today, again made in Europe...I would use one of these over most machines and it is super handy for those "little quick" cuts that we all do 90% of the time.
I put these things up there with the UNIMAT model lathe (I WANT ONE!) and the likes...which, whilst quirky are much sought after for good reason..they do the job and do it well.
jimi43":18uyosxb said:Hi Frugal....yes - if I find the correct "Startrite" metallic hammerite green spray I will post it here. I have a feeling that it MUST be available somewhere as there are so very many Startrite machines out there.
frugal":34he7xhx said:jimi43":34he7xhx said:Hi Frugal....yes - if I find the correct "Startrite" metallic hammerite green spray I will post it here. I have a feeling that it MUST be available somewhere as there are so very many Startrite machines out there.
I was just having a look on the Hammerite site and as well as the standard 7 colours in the hammered selection they do radiator paint in any of the 1200 colours in the Dulux range (they are al made by ICL). I wonder if the Radiator pain would be good enough to protect it from rust in the workshop...
Billy Bodge":18gjcdn6 said:Nice job. I also have one to restore but the riving knife is missing. Could you email me a sketch / pattern of outline so I can make one up. :wink:
Enter your email address to join: