Colin C
Established Member
I have bought an infill plane and would like to try and find out who it might be made by.
All help would be greatfully receaved
All help would be greatfully receaved
Help with a plane please
- Thread starter Colin C
- Start date
Help Support UKworkshop.co.uk:
Colin C
Established Member
Pic two
Colin C
Established Member
Pic Three
Colin C
Established Member
Pic four with one more to come 
Colin C
Established Member
Last one
MikeW
Established Member
Probably Preston. At least the mark under the cap is a Preston mark.
Take care, Mike
Take care, Mike
Colin C
Established Member
Thanks MikeW
That has put a BIG smile on my face as I bought this A Stanley beader ( No66 ) with one cutter 3 wooden planes, and stanley 4 1/2 ( made between 1914 -22 ) and some more bits.
So to me this is good news
That has put a BIG smile on my face as I bought this A Stanley beader ( No66 ) with one cutter 3 wooden planes, and stanley 4 1/2 ( made between 1914 -22 ) and some more bits.
So to me this is good news
Paul Chapman
Established Member
That looks like a nice buy, Colin 8)
Paul
Paul
DaveL
Established Member
Colin,
Looks like it should be a nice use.
Next you will say you only paid 50p for all of the stuff you got, I think you have a gloat there, even if you paid quite a lot more than 50p. =D>
Looks like it should be a nice use.
Next you will say you only paid 50p for all of the stuff you got, I think you have a gloat there, even if you paid quite a lot more than 50p. =D>
MikeW
Established Member
You're welcome!
It looks to be in good shape and a little cleaning and I think it'll work out well.
Take care, Mike
It looks to be in good shape and a little cleaning and I think it'll work out well.
Take care, Mike
Colin C
Established Member
Hi all
I have given it a bit of a clean already and sharpen it up ( was going to sell it ), but not now that I have used it .
It was great on the end grain of some sapele that I had to plane, the buy also come with some more old brace bits so I will be showing you all how to make the carving tools soon .
It also come with a mitre shooting block( Alf has some bits on her site about them)
I dont think she will mind me putting a link to it 8-[
http://www.cornishworkshop.co.uk/wwmitrejack.html
So after all I am very happy with what I pay for it all \/
I have given it a bit of a clean already and sharpen it up ( was going to sell it ), but not now that I have used it
.It was great on the end grain of some sapele that I had to plane, the buy also come with some more old brace bits so I will be showing you all how to make the carving tools soon
.It also come with a mitre shooting block( Alf has some bits on her site about them)
I dont think she will mind me putting a link to it 8-[
http://www.cornishworkshop.co.uk/wwmitrejack.html
So after all I am very happy with what I pay for it all \
/
Colin C
Established Member
Got it al from ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
The hole family went with me and the kids enjoyed the drive :shock:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... %3AIT&rd=1
The hole family went with me and the kids enjoyed the drive :shock:
bugbear
Established Member
Colin C":gytugmh9 said:
Great was the suckage. Had you spotted the infill?
BugBear
Colin C
Established Member
Hi Bugbear
Have another lok and you will also see a nice 1/2 shoulder plane too
( sorry I could not help myself :twisted: ) :wink:
Have another lok and you will also see a nice 1/2 shoulder plane too
( sorry I could not help myself :twisted: ) :wink:
A
Anonymous
Guest
Tremendous haul, Collin!
Colin C
Established Member
I was lucky as i was the only person to bid on them :shock: :? but more fool them
Similar threads
