Bgoat
Member
I've tried to remove the blades to sharpen them in my Fox planer-thicknesser but have run into a problem, which I hope someone can help me with. There are two separate blades, each of which isheld in place by four hex bolts (spare part #22564-200-108). I've managed to remove 3 from one blade clamping device and two from the other, but I can't remove the remaining 3 bolts because the alum key slips when pressure is applied. Can anyone advise me on a. how I can remove these 3 bolts; and b., where I can obtain replacements, please? I suspect I'll probably have to drill out the 3 immovable bolts but don't want to go down that route until I've got replacements.
Thanks in advance.
Thanks in advance.