PeterBassett
Established Member
I started a "woodworking and wood turning" course at our local college and this is the first piece i did on the lathe.
Its ash, 5 1/2" in diameter, finished to 400 grit and then three coats of danish oil.
I must admit, I'm pretty chuffed with it. The next one is a much bigger (10" or so) bowl in Oak...We'll see how it goes.
Pete
![2851_73175405793_634950793_1889784_3066215_n.jpg](https://proxy.imagearchive.com/174/174a6d2c5a62e858332e87ac3c99a1f5.jpg)
Its ash, 5 1/2" in diameter, finished to 400 grit and then three coats of danish oil.
I must admit, I'm pretty chuffed with it. The next one is a much bigger (10" or so) bowl in Oak...We'll see how it goes.
Pete