Doublecad - use with Sketchup.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chris Knight

Established Member
Joined
14 Jan 2004
Messages
6,641
Reaction score
3
Location
SE London - NW Kent
For a variety of purposes, it's useful to have proper dimensioned drawings from SU and that is expensive if you buy the Pro edition for Layout to get them. Some folk also say they are Autocad users and find SU hard to get on with.

Both these concerns can be addressed to a fair degree by using Doublecad - it's FREE from here. It is a powerful AutoCAD LT work-alike program - but better (according to the manufacturer).

You can see a neat video of it handling a SU import here. Once in Doublecad, you can then use Autocad-like commands to manipulate your file, save it etc.

It's a Windows program but runs OK in a VM such as Parallels for us Mac folk.

I have only fired it up once so have no real experience with it but it seems to work as advertised.
 
Thanks Chris. I have previously used another free CAD program, A9CAD, which I find does everything I want. However DoubleCad does indeed open Sketchup files and will save them as DWG files, which A9CAD will not. Thanks again.

xy
 
Chris, what an extraordinarily good find!

I'm used to SUs foibles now, but there are some thing I miss from a "proper" CAD program, like hatching and easy perpendicularity.

In the 1980s I worked for a company called PAFEC. It was at the cutting edge of design technology. The original challenge was to produce a CAD program that could be sold in the marketplace for under 100K. Now a program like this is available for free!

The test I like to use is to draw a tangent to two circles. We could do that in 1987, but some programs fail even today. How do you do it in SU? It's not easy. This does it without even blinking.

What an excellent addition to my armoury!

Thanks Chris, this is one of the better things that has happened recently! :)
S
 
Yes, good but not perfect. The problem here is that SU doesn't really do circles. So when you want a common tangent, it works out the tangent point properly. But in SU circles are really duodecatetragons (or should that be duododecagons - no, I prefer the former, there are more syllables :) ) so the tangent doesn't actually touch the circle at all, So no intersection for surfaces etc.

Much as I like SU, I think that their decision in the original spec not to support true circles was a mistake.

S
 
Thanks Chris.

Just downloaded it and first impressions are good i am used to autocad and trying to get on with sketchup and could immediately use doublecad. My old student copy of autocad doesnt work with the new windows operating systems and this will be most usefull.

thanks again

Jon
 
Chris. I have just tried some 'serious' work, tracing a scaled image to a drawing. I am finding the cursor action a little flighty, could be me, I'll get used to it. What I am really after is a quick to use manual of sorts. I find the help files slow going. Have you a favorite guide/manual that you use as a quick reference? Otherwise fine so far.

xy
 
Dave
That's the right link and it was working the other day and appears not to be now. Send me your email address and I'll send you the zip file. Your email contains the serial nos, yes?
S
 
Steve Maskery":1o0rkwcr said:
Dave
That's the right link and it was working the other day and appears not to be now. Send me your email address and I'll send you the zip file. Your email contains the serial nos, yes?
S
PM sent (in fact i think it went twice!). Thanks
 
xy mosian":37p65nrl said:
Chris. I have just tried some 'serious' work, tracing a scaled image to a drawing. I am finding the cursor action a little flighty, could be me, I'll get used to it. What I am really after is a quick to use manual of sorts. I find the help files slow going. Have you a favorite guide/manual that you use as a quick reference? Otherwise fine so far.

xy

xy,
I am sorry but I have no manual for it - I just tried the thing to be sure it would do the imports from Sketchup.
 
For anyone else having difficulty with the link, you can download it here
for the next 2.5 days. You'll still have to get your serial number from Doublecad, though, this is just the file.
S
 
I've received an (unsolicited) email saying they have resolved the 404 error so any new registrations should be able to download from the link the provide with the licence keys.


Dave
 
Back
Top