Ironballs
Established Member
This is looking very good, drawers should finish it off nicely
Corby TV Cabinet
- Thread starter cutting42
- Start date
Help Support UKworkshop.co.uk:
Ironballs":2bz35kpn said:
Thank you kindly, need to look for some handles. Any thoughts out there, not keen on tuned knobs, maybe some metal pull handles. Our bedroom uses mainly stainless where metal is used nut not sure about stainless with the darkish iroko.
Any suggestions.
Lord Nibbo
Established Member
This list from Knobs & Knockers will give you a good selection from which to choose.
http://www.diytools.co.uk/diy/Main/sc-3 ... -pulls.asp
http://www.diytools.co.uk/diy/Main/sc-3 ... -pulls.asp
Hi All
I have FINALLY completed the TV cabinet. I finished it in Rustins Plastic Coating as recommended by Derek. I have to say it is a nice finish and coats well. A bit fiddly with the 4:1 mix ratio but you can get 3 coats done in a day if you are going for it.
I am really happy with how it has turned out and it is really only my second piece of furniture and I have learned so much.
The next piece will be better!
In place in the bedroom with a small portable on it
I have FINALLY completed the TV cabinet. I finished it in Rustins Plastic Coating as recommended by Derek. I have to say it is a nice finish and coats well. A bit fiddly with the 4:1 mix ratio but you can get 3 coats done in a day if you are going for it.
I am really happy with how it has turned out and it is really only my second piece of furniture and I have learned so much.
The next piece will be better!
In place in the bedroom with a small portable on it
