Come on own up, who got some free advertising this morning

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
=Adam=":kt5snulp said:
These seem to be very simple to make (providing you have the spindle moulder)!

Anyone know how the recess could be done without a spindle moulder?

Backsaw and Chisel, Router plane and skewed block of wood on base, Gouges, Rasp... The possiblities are endless!

I'd go for cutting the shape with a tenon saw, hog the waste out with a chisel, add a little round to the internal corners with a fine rasp, tidy up to the line with a skew/paring chisel and maybe smooth with a little sandpaper if the rasp had left too coarse a toolmark...
 
BAHAHAHA

American Oak - as the timber.

If he's selling a lot at that price I bet he makes a killing.

I like it, but I think after I made the first 30 i'd start losing the will to live
 
take a piece 1.8m long then cut the channel, cut up to size. wouldn't take long at all.
 
Old thread. Been making something similar for a couple of years out of Birch ply as customer give-aways:-

8169028657_99cb196a53.jpg


8169060076_614e871614.jpg


^^That's the original 18+12; the newer ones are 12+12+12 and double-sided, with a different angle on each side. As mentioned above, I make them up in 4' sections during the odd quite time - all you need is a saw with a decent blade.

Pete
 
Hi,

I like the ruler and a piece of MDF, might make one of those for my self.

Pete
 

Latest posts

Back
Top