Search results

Hi, The wife has bought a second hand chest of drawers second hand, they are in good condition and made from Oak. She wants to lightly sand them down and renovate and protect them. Would you use a hard wax oil after sanding or some other product? An idea as to which brand to buy would also help...

Looking at this https://www.lawson-his.co.uk/makita-af601-brad-nailer-16g?gclid=CjwKCAiAxeX_BRASEiwAc1QdkTxCKXWvKFyRhbCqreOIO3YUX1kOKI-MOK-7kWf1_HS8M7aHlqInVRoCiqUQAvD_BwE I thought 16g nailers were all finish nailers and only 18g can be brad nailers? Im obviously wrong somewhere!

Hi, Ive had a look around and fancy buying the Tacwise air nail gun and also the Hyundai compressor. Or even the Stanley from Screwfix! Would the 8ltr Hyundai compressor be suitable or would i need a 24ltr version??? Tacwise GFN64V Air 160 Finish Nail Gun 16G - TACGFN64V - Available For Pre...

Hi, I'm looking for a 16 guage cordless nail gun and there are a number out there. Im a bit of a pauper so a cheap one, £200 max. Has anybody any suggestions as to which is a good one? Thanks

I,ve oredered myself a Bosch 1400 router which takes 1/4" and 8mm bits. I imagine that the 8mm bits are superior to the 1/4" ones so they would be the ones to use...am I right in saying this???

I'm soon to start making a dolls house with MDF for my grandaughter and would appreciate a bit of advice before I start buying bits. Can anybody recommend a good glue for MDF? Would 3.9 x 40mm MDF screws be suitable for screwing into the end grain (12mm MDF) without splitting etc? Thanks

Thanks for your replies. The machine is only going to be used for drilling holes in softwood, I know my price range is low, but I am only asking for advice on the best cheapo. I'm now looking at the Bosch PBD 40!

I desperately need a decent bench drill and have looked at these. If you have any suggestions on any other make for the same price range please tell me. I don't particularly want to wait and try and find a second hand one which may be better for the same money. They are impossible to find that...

I've acquired some Beech wood (big branches) from some trees that have been felled. Measuring about 4ft long and at least 6inches in diameter. Will I need to dry these out before I can cut them up for use, anyone any ideas?

I want to engrave the names of my grandkids on some stools I am making, the letters I want about abut 2" high and perhaps 2/3mm deep. I was then going to paint the engraved letters and then varnish over the whole stool with Ronseal clear Ultra tough varnish. Would this be any good for...

Thanks everybody, I've gone and got the JCB! It was a bit bigger than the Boch and felt better in my shovel like hands! I've tried it out this afternoon and I'm quite impressed with it!

I want to buy a random orbital sander but limited finances mean a cheapie! I cant decide between these two, a Bosch PEX220A at £50 or the JCB ROS-330w at £57 what do you think? The JCB has a variable speed 6000-12000rpm with a 330w power output, whilst the Bosch is not variable but runs at...

Might seem like a stupid question but I am an amateur and a newbie, but there seems to be different opinions as to which is the most durable for making outside furniture, redwood or whitewood? Any opinions? Also what type of wood is decking generally?, presumably it's supposed to last as seen...

Thanks Martinka you have cost me£59.99 at Lidl. Money well spent though I'm chuffed with its performance!

I need to buy some good quality wood preserver for outside soft wood. Plenty of different brands about but they all seem so expensive. Can anyone recommend a good one at a reasonable price?

Thanks very much Matt! From experience for soft wood is it better to use the Kregg screws or will normal wood screws do the job?

I've had a look and ordered the Kreg R3 as recommended by Matt. Thanks!

Can anyone recommend a good cheap Kreg Jig or other ideas for drilling holes at an angle? They all seem so expensive for what they are. Thanks

Oh well 3rd attempt today, the idiots delivered the machine to my fathers address who had bought it for me using his credit card and not to me which was the previous delivery address. Anyway the courier wouldn't leave it as there was no exchange. A wasted week and a waste of my time. I...

I ordered online a Record BS250 band saw last week. it came with the box intact but the machine damaged. The base was badly twisted so it wouldn't sit flat, cracks were in the welding and a plastic cover had the holding lugs broken off. No problem with the supplier and 2 days later a courier...