Recent content by Stocksy27

haha thanks been looking at the cutters for few hours not sure how i missed that one

thanks guys sorted now from whitehill, another one i need a 50mm radius profile to make some corners but struggling to find that too, i know there is a limit to max projection on cutters now ?

hi looking for spindle tooling to machine some 22mm MDF cabinet doors only one i can find is a discontinued trend set. https://www.mtmc.co.uk/product.aspx?Pro ... gKARvD_BwE

you tried HDF? high density its a lot harder and does keep edges for longer?

its a 400mm radius curve, made from 3mm mdf vacuum formed section is 75mm high 24mm thick groove needs to be centre of the 24mm and 15mm deep

making some curved draw fronts and curved doors, 5 piece tenoned together, normally id use the router with a bearing guide on the fence to groove the rails, unfortunately I've lost the bit for router wondering if any one else has any ways of doing it different? have various routers but can't...

looking to get a new hoover, mainly used on site on plunge saw planers etc, currently have a nilfisk which is great when used with a bag, how ever i want to be able to use it without a bag, the fine dust clogs the filter too quick and using it with out a bag or a filter just blows dust out the...

9.5 would be better obviously but I've used 6mm veneered mdf for years on big draws works fine just glue it in

lawcriss will do laminated boards saves loads of time and hassle then just do the edges

we use a sayer lack cellulose primer, quick drying and won't fluff mdf up like water base sands really good and flat too

well the blocks came today, groover is wealden own which looks good, rebate blocks are actually trend not wealden own brand

what are people using for clamping doors up? I've used all sorts of sash cramps and always go back to the record t-bar ones as these seem to just work so good and get joints up nice and tight and virtually unbreakable? any other recommendations

as above, I've always used adjustable groovers as the mdf varies so much, so get it that panel slips in nice, too tight and be hard to square up, then little glue, always MDF styles and rails were possible, Tulip styles and hinge side if its taking a butt hinge.

PAC1 do you have the 120mm or 150mm?

hi looking for some new tooling and usually use leitz/whitehill etc but wealden have exactly what i need wondering how there tooling compares any used them? http://www.wealdentool.com/acatalog/Onl ... l#aF431200 http://www.wealdentool.com/acatalog/Onl ... l#aF252100