I have been using an old Myford ML8 which has been great and got me slightly hooked on turning but it has its limitations. I’m currently looking at a secondhand Poolewood with variable speed controller but the seller doesn’t have any details. The headstock they measured as 25mm and tailstock...
Managed to release with a chisel and bigger hammer!! No damage done to spindle thankfully. Will definitely use the coller next time the drive centre gets fitted.
Thanks again for responses, much appreciated
Thanks for quick response, will give it a try. Just sorting through box of bits and found the collar that should have been fitted to ease removal. Hopefully a bit more hammering will free it. 👍
Hi all, I’ve recently been gifted a record dml24x lathe which has a drive centre fitted in the headstock which I’m unable to remove. It cannot be removed with a drift as there is a bearing fitted in the opposite end. Does anyone have any ideas as tried mole grips but appears solid. Thanks in...
Thanks. Not sure how to check voltage but saw is in garage and socket comes straight from consumer unit so should be sufficient. Never had an issue with any other power tool. Not sure where else I could plug in.
Hi, I recently bought a second hand table saw that was working when I viewed it but once transported home I’m unable to switch the machine on. You can hear the switch click when turned on or off and the fuse is good but I was wondering if anyone has experienced similar. I suspect it may be wood...
Retired this year so trying my hand at turning on an old Myford ML8. Still buying tools to make things easier but really enjoying making handles and pork pie dolly’s!!
If anyone could recommend a decent 4 jaw chuck that suits the ML8 as totally lost which to go for.
thanks and happy new year...