devonwoody
Established Member
Recently purchased a good quality log of sycamore 81mm thick, (75mm ordered) . (kiln dried)
I was able to get 5 boards 10mm thick p.a.r. out of the 81mm thick board, using a 4tpi bandsaw blade and working with a planer/Thicknesser.
Thats nearly 40% wastage.
Does anyone expect to get better results than this?
I was able to get 5 boards 10mm thick p.a.r. out of the 81mm thick board, using a 4tpi bandsaw blade and working with a planer/Thicknesser.
Thats nearly 40% wastage.
Does anyone expect to get better results than this?