mick cooney
New member
Hi there, this is my first visit to this site, and i'm new to using a chat forum, so if i do anything wrong try not take the p;;s
i own a lurem c26, and the last couple of uses i'v noticed the lift and lower on the planner thicknesser is quite stiff and i have to turn the wheel / handle probably a whole turn before it does anything.
i am pritty go with mechanical things, so i started to look at removing the lift mechanism. It looks like you have to dismantle the whole saw table and planner cutter mech to lift out the rise and fall mech, helpppppppppppppppp
am i looking at this problem the right way (homer) or am i missing something !
i don't have a manual either, any idea's.
cheers mike
i own a lurem c26, and the last couple of uses i'v noticed the lift and lower on the planner thicknesser is quite stiff and i have to turn the wheel / handle probably a whole turn before it does anything.
i am pritty go with mechanical things, so i started to look at removing the lift mechanism. It looks like you have to dismantle the whole saw table and planner cutter mech to lift out the rise and fall mech, helpppppppppppppppp
am i looking at this problem the right way (homer) or am i missing something !
i don't have a manual either, any idea's.
cheers mike
