Forum users' Table saws

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
SIP 01332 10" that I bought second hand, bad condition, in the process of refurbing and can't use it yet.
 
A Deft T30 from Lyndhurst with a Osborne EB-3 Miter Guide.

3953299340_3c818e8eb0.jpg

(with self made fence faces)

Success Schummie.
 
I have had a SIP 01332 10" for a year now and I am totally happy with it.

I have recently prepared an updated results of the survey to date on a spread sheet but do not know how to get this into the thread. Those details include my saw.

See my separate posting on Site Queries section.
 
Ken,

You might be able to cut and paste the excel into a thread like this one

BA bolt details

BA no Pitch diam mm diam in head mm head in
0 1.00 6.00 0.236 10.50 0.413
1 0.90 5.29 0.208 9.25 0.364
2 0.81 4.66 0.183 8.15 0.321
3 0.73 4.11 0.162 7.19 0.283
4 0.66 3.62 0.142 6.33 0.249
5 0.59 3.19 0.126 5.58 0.220
6 0.53 2.81 0.111 4.92 0.194
7 0.48 2.48 0.097 4.33 0.171
8 0.43 2.18 0.086 3.82 0.150
9 0.39 1.92 0.076 3.37 0.132
10 0.35 1.69 0.067 2.97 0.117


But the excel formatting goes to pot sadly and it strips out any excel table features.

Otherwise I can host it for you on my FTP site and give you a link to it if you like.
PM me to sort out details.

Bob
 
My TS is part of a Robland combi - nice and solid cast iron with a sliding table for crosscuts. The fence leaves a lot to be desired...
 
Thanks Bob, but as I hoped Charley Admin has stepped in and I have now sent him the spread sheet for incorporation somehow.
 
My apologies if this thread is no longer active, but my TS is a trusty old Wadkin AGS10.

Regards to everyone. Jim.
 

Latest posts

Back
Top