Search results

I hope this loads

Hi Prizen, I think the TS200C has been replaced by the TS250 with better build and higher spec for £869.00

With a new Record Power machine you will get a 5 year gaurantee and if you buy a second hand one you don't know what sort of abuse the motor has had. You pay's yer money and yer takes yer choice as they say. Good luck mate whatever you choose. Ray

Hi Prizen, I think the TS200c is a table saw not a band saw but if that is what you want you might get a good deal at D&M Tools of Twickenham. The TS200C is a decent spec for the price with an integral sliding beam and a solid table, you might want to have a look at the new Shceppach table at a...

Great workshop Jon, can I ask you what problems you had with building regs and Part P as I am in the process of wiring my workshop up again due to more machinery going in. I plan to bury 10mm SWA 600mm deep and install a new 8way cosumer unit with a ring containing 6 double 13amp and 3 16amp...

My workshop has 4" concrete base with DPC then subfloor with insulation underneath, the walls are clad inside with OSB board with the cavity filled with rockwool the roof is insulated with foam insulation boards I retrieved from builders skips and also lined with OSB which I scrounged from a...

Richard, I went on the Brammer website and the only belt that was open ended was the link belt is that the one you and Tusses describe?.

Thanks for the attachment Robbo I have been trying to obtain a manual for the lathe but so far no luck. From the diagram it looks like the motor is attached to the body of the lathe is that so?, because my lathe came with a seperate motor on a wooden plinth. I was going to mount the two parts on...

Thank you Dick, I will have a look at it tomorrow and have a go at removing the shaft, it is a bit rusty so a soaking in WD40 might be the first course of action. Ray

Hi Woody, I might be too late but if you have any tools or equipment left I might be interested, please let me know via forum or phone me on 07870 173 430 I am in Notts

Hi there, I have just joined the forum with the hope that there are a few experts out there that can help me with my Coronet lathe that was recently given to me. I think it is a Coronet Minor because it matches photos I have seen on the web but there is no chuck with it and the drive belt is in...