Search results

DigitalM They weigh in at 1.67Kg each with the capacitors, so £15 Parcel force 48 or i can give Hermes a try £10. Regards Bright-Spark

OK, but they are very small 1.27 l/s Data sheet Bright-Spark

4No. small centrifugal fans. I got these to build a air filter but that was >5 years ago and this is as far as I got! If they are any use to someone, you can collect from Glossop, High Peak; Huddersfield town center, week day; or I am generally in Sheffield once or twice and week, week day...

Rutlands mobile base, no longer needed. Just taking up space and collecting dust. You can collect from Glossop, High Peak; Huddersfield town centre, week day; or I am generally in Sheffield once or twice and week, week day. I can ship, but as it is so heavy costs would be prohibitive...

Devonwoody Not that new, just becoming much more common place. The better ones Eg. MK have the USB outlets in a better position and smart recognition of the device for fast changing. The advantages are that you don’t use up a 13A socket or have to find charger. I spec a lot of these for...

Karl Not sure exactly what you mean, but for a three phase motor swapping 2 phases around will simply change the rotation. You can connect the star contactor in any order as this is just connecting the ends of the winding together. The connections on the main and delta contractors should be...

I have an older TS4010 which is pretty heavy with the sliding table on. You can tip it up on to one side relatively easily to fit a mobile base, which I had original fitted. I ditched this as it wasn't that mobile with only 2 swivel wheels and such a big heavy saw. I have now made and fitted...

At home we have a Aico domestic fire alarm with 160RC series mains powered sensors. These are hard wired with 3 core cable and networked together any detector head operation and all the heads sound. They do Radio linked bases for this system that could be spurred of the lighting circuit in your...

1 min 09 seconds in https://www.youtube.com/watch?v=VeDnFTmqmI8 Bright-Spark

Final update before information over load. Additional drawing showing Standard DOL wiring before alterations Amended drawing showing finalised single additional relay design by Monkey Mark. I have added colouring to the wiring in an attempt to make it easier to follow. The control...

HOJ in Monkey Marks drawing the start button is connected across 17 and 18. The switched live feed from the controller is connected to 18 the out going side of the start button, so is effectively connected in parallel with the start button. In inching mode the controller will momentarily apply...

DOL wiring diagram complete. Not as simple as I first assumed so 2 relays will be required, but this is not a show stopper. 1 No. Control Board and remote -http://www.amazon.co.uk/gp/product/B00YXN47LI?psc=1&redirect=true&ref_=ox_sc_act_title_2&smid=A2LB1IUQW3VNM 2 No. Control Relays...

Monkey Mark Had a proper look at it now Use channel 1 in N/O inching mode replaces momentary push on start switch Use channel 2 in N/C inching mode replaces momentary push on stop switch Wire channel 1 in parallel with existing start button and channel 2 in series the stop button, this will...

Monkey mark This would work, more elegant, more flexible, ordered! Thank you Bright Spark

Monkey mark I understand your concerns but the contractor will not self latch if the only thing connected across the coil is the supply from the plug-in socket, it will just operate as a contractor. As I wrote the "The local stop start on the DOL will not work after this, control will be by the...

This is a workable solution with a DOL but not as elegant as i recall Bob 9fingers being. The local stop start on the DOL will not work after this, control will be by the remote only Spur a 13A single socket off your 16A machine supply in the same size cable, this will become the control...

You do not need to wire a switch at each machine if you have a DOL starter. Get a infrared controlled plug set, you can then wire from a plug top to the coil in the starter assuming its a 230V coil. You can then control the coil and therefore starter by remotely switching the plug on and off...

Draper Expert do 1350W motor body with a 1/2" collet which mounts in a fixed or plunge base. The type Mr Wandel uses in his machines. No idea what they are like, though there is at least one discussion thread on them. Bright-Spark

You can now get larger 125mm inlet, workshop sized dust commander style cyclone, from UK ebay seller here http://www.ebay.co.uk/itm/221495236730 Hoping to get one later this year. I have no affiliation with this company Bright-Spark

Thanks Marcros, at that price might give it ago. Looks like I might be able to take a file to the existing bar and I can collect as it’s not to far from the office. B-S