Search results

Well I would be leaving too as the site colours are far too harsh on the eyes but cannot find a way to delete my membership so will just log out and not return

As Myfordman has said a blade with extremely fine tooth count would be needed and would still be very dangerous to cut tubing of any sort the best thing is cut off saw like this https://www.screwfix.com/p/makita-lw140 ... 0wodjEEATQ

Having a tidy up and clear out, this chuck came with my lathe I bought some years back and have never used it. So it's gotta go, it is all there except for the "C" spanner which I do not have. The thread size is 1" 1/2 x 6 tpi I would like £125 for it collected, or I can post it at buyers cost.

OP needs a bigger bandsaw to cut 20cm, I have the Axminster AWHBS450N and it easily cuts 28cm oak with room to spare. I also use tuffsaw blades.

couldn't elk myself but laugh :D wife says it seems a STAG gering amount for two deer

Are you going to glue these down to the new screed floor if so why the need for tongue and groove just clean the edges and lay or if you need to have tongues then groove and use loose tongues

Made these last winter the curved top rail is made from one piece of timber 200 x 50 there is some waste but not too much, getting the tenons at the right angle is the tricky bit. I used sketchup to design them with the curves and using measurements from a straight line in sketchup produced a...

Have a look at a hydraulic car body repair kit, might just do the job in conjunction with acro props

yes but how much to have it delivered in your three links amazon is actually the cheapest and trago the dearest

turning tools in 1st pic left is possibly a henry taylor parting tool 2nd is a crown thin finger nail gouge that has had the handle cut down 3rd again is possibly a crown bowl gouge which has been ground wrongly 4 looks like it is home made. As for the other pics they are nothing to do with...

I have the stahlwerk 200 amp mma and tig inverter welder and so far it has done all I have asked of it, only last week I used it to weld 75mm angle onto rsj barn uprights to sit concrete panels on, I use it mobile plugged into a 9 kva genny. So far I have not had the need to use the tig function...

you would also be pushing it to the limit to weld anything thicker than 10 gauge and max rod size of 2.5mm

microwave would also work if the piece is small enough to fit (cook them) probably very tasty if not burnt to a crisp, I have some kiln dried oak with holes in the sap wood and all the little critters are nice and crisp from the heat ha ha

A close up pic of the rotor would be helpful but I suspect that what you are missing is the chip breaker bar with the bolts in it which holds the knife in position and also adjusts the height of the knife via allen screws.

I have the screwfix Titan sds and so far has not let me down and done all I have asked of it.

If its any help I have made six of these using my triton router fitted with its rectangular base plate and a bull nose bit fitted. I marked all depressions with a cross in pencil directly on the wood (no template) using a large tri square, set the router to cut the first one, put a clamp guide...

It's funny this post should come up just now as I have had the same thing happen to my latest build, on all my other projects i have allowed the glue to set then removed any excess which was all fine. On this build I decided to wipe off the excess with a wet piece of paper towel and on all...

Hi you should be able to move the blade guard out of the way by lifting it anti clockwise on it's pivot so that the fence slides out, there should be no need to remove machines screws. I have the axminster model similar to the 107 and thats all I do just watched the youtube video and there is...

Over 100 tools that makes them on average around the £5 mark each, now I know a lot of folks pay more for just one of the smaller items say one of the chisel's for instance so seller got a fair price and the buyer would probably of paid a lot more had he bought the items individually.

Well I nearly had a nasty buying experience just before christmas. I found that I needed to replace my 14 year old fire wire card (no drivers for it since XP) so searched online found 2 good deals from 2 Google certified shops both the same price for the same card. So I chooses the one with...