Recent content by Tim_H

Dear Mike, Something like this http://www.ebay.co.uk/itm/Battery-adapt ... 2128853739 Regards, Tim

I did not do anything very complicated, I bought a clip on fitting that allows you to use the newer lithium ion batteries and then I can use the lithium ion charger. Sorry if that isn't what you wanted! Tim

I have a fiveteen year old Makita cordless drill which I converted from nicad to lithium ion with a cheap eBay fitting, built like a tank and still going strong, bought a newer lithium ion cordless drill, lighter and equally efficient, I have just bought the cordless ROS, which is so convenient...

Just another warning about heat generation with CA especially if using an accelerator (which you may not need if you are using thin viscosity in fine cracks). I use a thicker viscosity off Amazon for pen finishes and managed to burn my finger quite badly last week when a drip of glue and...

I have only been turning for about a year on and off and I have the Rutland's lathe, which is a small lathe similar to the small Jet lathe. It is a very good lathe for a beginner but if I was to buy a new one I would think about variable speed and a bigger diameter capacity if I wanted to turn...

Great video as ever. I just love the fact that May the 4th is Star Wars day, I would never have thought of that!

Thank you for that, I will bookmark them. Tim

Marcros I have the SC3 for my mini lathe, I have no complaints it is a solid well made bit of kit and fine for my needs but the SC4 is that bit bigger and has an indexable backplate which the SC3 does not.

I would agree with Jim, nicely made bit of kit and does what it says. I have also made my own extra wheels out of MDF. I have not used the wheels that allow you to see lathe tool cutting faces for sharpening freehand but it is a clever idea. I would buy it again

Thanks for the comments, you are right about the junctions, the European pen design was an interesting choice for my first pen but I will endeavour to persevere. The dust collector is a WIP and I may well chop bits off if needed or redesign it completely, although so far for pen turning it is...

I have posted something similar on the what have you made today thread. However I thought I would post here as it is all turning related. I am just finishing my lathe workbench (just some drawers to sort out in the base) and I threw together a small project dust collector, based on designs on...

Three things, one a work in progress: A workbench for my lathe Dust collection for small projects, like pen turning, which works really well. My first turned pens, European style twist pens in oak and sapele and a slimline in oak, finished with CA glue. I have a way to go but I will have...

You are on a slippery slope, I only started turning on my Rutland's special offer a few weeks ago and already it has taken over my workbench and I am continually thinking about things I could turn. I turned a file handle out of a 2x4 offcut and was embarrassingly proud. For a first go that is an...

Marc, Here is the link to my workstation build on this site. another-axminster-ts-200-workstation-wip-with-photos-t70849.html Hopefully that will show you how not to do it. If I were doing it again I would put a router in the left hand side table, I still might. Tim

I bought the Axminster band saw upgrade fence. I also fitted an aluminium zero clearance insert plate and built a workstation. Here it is almost completed. Have a search on here for a blow by blow account from a couple of years ago. Regards, Tim