Recent content by Phill joiner

What about leaning the lathe over at 45. Just a thought

SOLD

I think it was heat more than water. The door had been painted black and it was last summer, when we had those crazy temperatures. I changed the panels for accoya and no problems.

I can only describe it as swelling really. Only in the corners of the panels. This is the front door made from accoya.

I made all my windows and my front door in accoya 3 years ago now. They had morrells spray colour finish. Square flush joints, no v grooves. I've had no problems what so ever. The doors 1100mm wide x 2200mm high x 57mm thick. Arched top. The front of the house gets a full on hammering from the...

Hi Andymaker Yes its in full working order. Two knives in the block Yes I have a fork lift available. Stormer, Footprint is 2000mm long x 1600mm wide Kind Regards Phill

600mm wide beds, top and bottom Very heavy cast machine 3 Phase £1200 ono Buyer to collect from south wales area.

I'd give a liquid screed guy a ring in your area. Just fix a 80mm batten along the door end and pump it in. Job done.

I made one for my last house. Made it like a frame ledge and brace door but the head was only tenon thickness to allow enough to slide the T&G panels down from the top each side in grooves. Then glued front and back faces to the top rail after it was assembled. Still left 2mm expansion gaps...

I thought the whole point of abranet was that if used with an extracted sander it will not clog or throw dust everywhere. We use them on our air palm sanders in the workshop and find the dust extraction is great. Not much good for just sanding in the hand.... A tad expensive compared to the big...

My wife wanted a mushroom.

I like this one a lot

How do you finish the base off like that with a natural edged bowl then Chas?

I've run my own joinery for 16 years so this is what I do every day. The turning bit is new to me but I love a challenge. (hammer)

Yeah that's where I got the idea from. He has a very nice workshop and some crazy machines. Clever guy. I do find my self shouting at him 'NO' when he uses his cross cut sometimes though. He doesn't hold the piece of wood which is against the stop....Could jam against the blade and fly out.