Recent content by ninjabika

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. N

    new workshop build

    hi all thanks for the replies, have been looking at my council planning portal and it looks like the apex roof is out, not a problem, because it's within 2 mtr of the boundry the roof must be no more than 2.5 mtr so i'll be having a flat roof then well some thing like 8"-7" i've found this...
  2. N

    new workshop build

    the concrete supplies is called accumix, they also supply the pumping unit so i'd have thought they'd supply the right mix. they also mix what ou need on site then pump it. i'm not using any plans just out of my head, i think i'm ok less than 30 square mts , made of non combustable material...
  3. N

    new workshop build

    hi all well i've finally took the plunge and started on a new workshop / out building, it's going to be 24' x 11' x 8' to the eaves with a tiled apex roof i've done the digging took me 3 weekends on my own , have gone down a minimum of 12" mor like 15" in places, have been ringing around...
  4. N

    mixing concrete

    HI no particular reasom why i was looking into quantaties, will probobly go the ready mix route anyway , i just like to weigh up all my options. martin
  5. N

    mixing concrete

    cheers , so if i'm right a framework of 3.048 x 3.048 x 100mm (10ft sq 100 mm dp) approx a cube will require 2 jumbo bags + cement + water
  6. N

    mixing concrete

    hi it's ok, i've found a calculator that gives you what you need to produce a cube of concrete http://www.builditshop.co.uk/concrete_b ... ac=EGBV2-K martin
  7. N

    mixing concrete

    dave lets just say it did contain a cube of ballast, when mixed would it fill the form work as mentioned ??? martin
  8. N

    mixing concrete

    hi not really sure if that's what i mean. i'll try another way a jumbo bag of ballast is virtually 1mtr cu , so when mixed is it still the same volume i.e from one bag with added cement mixed to a 1-5 ratio could you pour it into a form work 3mtr x 3mtr x 100mm and fill it any ideas am...
  9. N

    mixing concrete

    hi does any body know how much area a jumbo bag of mixed ballast would cover if mixed with cement to create a concrete base 100 mm thick martin
  10. N

    Shed / Workshop Build

    mike that's fine, just looking at his rough costings so i've got something to compare against, seeing as i intend to build 6.00x3.00 (20 x 10) this year , well as soon as really martin
  11. N

    Shed / Workshop Build

    hi can you tell me what size this building is please ?? martin
  12. N

    planning permission help, already posted elsewhere

    hi don't know if this is of any use to any one, if you click on any part of the house or garden or out buildings, it gives you links to any rellevent information you might need http://www.planningportal.gov.uk/upload ... guide.html martin p.s you need to click launch the guide at the...
  13. N

    Workshop shed planning permission

    hi don't know if this is of any use to any one, if you click on any part of the house or garden or out buildings, it gives you links to any rellevent information you might need http://www.planningportal.gov.uk/upload ... guide.html martin p.s you need to click launch the guide at the...
  14. N

    saying hi

    hi all thanks for all the helpfull replies, have just been having a trawl around the net and have come across this place http://www.northstreetsheds.co.uk/gallery.html has anybody had any dealings/ experience with them , prices seem reasonable , shall go and have a look in the new year...
  15. N

    saying hi

    thanks for that, excuse me for being dumb but what goes down first as in dpm , sand, hardcore ??? also what size was your building martin
Back
Top