MikeJhn's latest activity

Mostly cut and glued to the drawing. 😉

the rod isn’t calculations as such Mike, in most instances the drawing (if I’m lucky enough to get one 😄) has all the salient details on...

Hi Mike, I rod everything out I make 1:1 and put every detail you can imagine onto it. Position of mortice and tenons, depth of tenons...

One page of calculations and all set out from a straight line, but I suppose its easier to physically set it out if you have the room.

One of the most interesting threads on UKW for a long time, just one question, out of interest, why physically setting it out rather...

Tell that to the pink one I saw last night

I have one of these: https://www.brother.co.uk/labelling-and-receipts/electrician-and-network-infrastructure with the computer interface...

Is a condensate trap necessary? Probably not it the fan overrun is sufficient, I would recommend a humidistat in the shower room close...

Looks like an interesting project and something satisfying and lasting. Of passing interest, here's a link to the mathematical...

Look on the Velux roof window web site thy sell flashing kits and roof windows for all roof types of construction.

As you quoted my post, Is that question directed at me? if so I don't understand.

I don't think it is ambiguous or open for debate, "Rising Damp" as the lay person understands that term does no exist, capillary action...

It's a bit dry, but worth a watch.

Most important part to get right is the level of the shower tray, everything else is set out from there, did not help on my very old...

The biggest improvement I did to my version was throwing away the fence and fitting an Axminster compact router table fence, also with...