Recent content by jimfin

Hi Guys. The mechinizim on the blade heigth ajustment is not working on my table saw. The washer that fits on the adjuster bolt has come loose. You can see in the pictures where the washer should be in the groove and where it is now loose. Do I need new parts or is there a handy fix?? Thanks...

Do you mean across the back of the boards (= ledges), or do you mean in line with the boards (like breadboard ends/ rails)? By "top and bottom braces", do you actually mean braces (which are diagonals)? Or do you mean the horizontals (either ledges or breadboard ends/ rails)? What I was...

Was thinking I might forget about a top and bottom brace, and go for 3 horizontal battons on the inside. The better half will not go for the diagional braces. Looks too much like a shed door.

I want to make a rear door for our boat. Because if the size of the frame, the max thickness is only 18mm. I have found some 18mm iroka cladding T&G that is 87mm coverage. So running down the length of the door I will need 6 lengths. I want to put a piece across the top and bottom of the door to...

Update After sanding down to the bare wood I painted the lettering with gold enamel paint. I bought a tin of "woodoc" marine matt clear varnish and a friend sprayed it on giving it about 4 coats. Have to say it looks great. I'll see if I can remember to post a picture of it.

We have 2 wooden signs with the name of our boat cut into the wood. One sign on each side of the boat. I want to clean up these signs. Any suggestions on what I should do?

Spot on. Just want to know what would be the blade to get for a cleen cut without spending a fortune. It's only for hobby and DIY.

Can any of you guys recommend a 10" circular saw that will give a clean cut. I will be mounting it in a Clarks 10" saw table. Thanks for any advice. All new to this.

Hi All I have just bought a Bosch 1200 AE and I want to know how to mount it in a router table? Any advice appreicated.

I m very new to woodworking. I was looking at a set of plans and it recomends the use of a dado saw. I know the problem with these as in europe we have braked circurar saws and the dado is not suitable. What can I use instead of a dado?? Thank you for any replys