Recent content by Highwayman

I had similar issues when I stripped my triton , I removed said screws and then tapped around the body with a soft faced hammer . I think the bit that binds is actually the armature top bearing . I hope this helps Cheers Paul.

yep its about 15 years old, I keep meaning to update it but its like the duracell bunny it just keeps going & going . If I remember correctly I paid about £12 for it I just wish Id bought a shedload of them. Cheers Paul.

Had a bit of shop time today and so I thought Id catch up with some bits n bobs off my tuit list Firstly a doobry to help catch the dust when edge profiling secondly a much needed hinge jig No wips Im afraid because I never remember to take pics until the end...

I made a few a while back and used paint kettles from the local decorator supply place [/URL]

I too have fitted this fence to my TS200 and find it excellent I also struggled with setting the fence square to the base initially as the instructions were abysmal but overall I am pleased with it. [/URL] Cheers Paul.

[/URL] Ive recently tidied up a new TS, OCI, riving knife, removed the casing round the blade, and the full seal up with duck tape . I will if anyone is interested do a WIP. My riving knife was made out of 2mm sheet steel nothing flash, the OCI is 3mm sheet Ally drilled and csk using the...

Thanks for the encouragement Tim Ive sourced most of the materials now so the the big build will begin on my next off days ! Cheers Paul

Quality WIP there Tim having just bought a Ts200 and the same fence as you I shall be shamelessly copying your design :twisted: . Many thanks for doing the design work Paul

Thank you for looking guys I think I'll take your advice and mock several different ones up out of 6mm mdf till THE look arrives

Hi long long time lurker here with what should be an easy question Is there a ratio for rails and stiles ? Im building some wardrobe doors aprox 6 ft tall and cant seem to get the proportions right in my head for rail/stile Cheers...

Thanks for looking, Dan-K I will post some when the Memsahib has done her bit Coleysbiscuit the banding was the best thing I could come up with ,I just couldnt find any galvanized strip locally :? and the kettle seemed just the right size to be in scale :idea: cheers...

Theoretically I can cut a 38" radius but i just had a bit of T track that long and didnt want to cut it down It is clamped down ,thats how i did it to start off with but now I have a much longer slider so I can sort of spiral cut into the finnished diameter.

Not that many Ive only had the BS for a few weeks just thought it would be a usefull item , much quicker than setting up my router Made it from bits i had lying about which means apart from time it was FREE ! :lol:

Hi Heres a quick jig I knocked up for the bandsaw No WIP Im afraid but Im sure you can get the gist

Heres a couple of planters I knocked up this weekend for the Memsahib no WIP Im afraid but having got more orders from the family maybe next time Im not really at the level of most of you fine craftsmen but Im learning :shock: