flh801978

I’m sure if you wire brush that soak it in a solvent of your choice then warm it with a blowtorch a good screwdriver will have that out Ian

record inserts are 40mm x 2mm

Skippy the bearings are just standard bearings from any bearing supplier...theres one in most citys/towns very cheap..

As i said these are metal centre drills they wont deviate from your position

I would use a centre drill designed for metal to spot your holes then go down with a good quality 2mm metal drill running it fast

Tom If you want a 90 degree one i have one at £40 if you want the adjustable genuine one its £160

Hi tom I paid more than that for mine

I think i have one spare …how much do you want to pay?

I actually cant think of a good way of doing this…cutting a 2mm slot in a 4mm dia doesn’t leave much…1mm thick at the thickest 3mm even...

It will cut all woods and non ferrous metals Engrave cut laser engrave cut thin stuff by laser All within an envelope of 420x297x150...

You do realise that a3 is 420 x 297 x 150

Best of luck getting a big Cnc setup for £800

Paul If you are near or can get to sheffield i can show you and sell you a nice machine A3 x 6 inch envelope size wise

Cobbs. Did i read that the device was costing you too much to produce now? From 25 to 90£ Let me know if i can help..i have an...

I presume you are pad-o -vac? you just got to put your prices up to compensate for the extra postage and dont sell such small quantitys...