flying haggis
Established Member
been given this scroll saw, the motor runs and the blade goes up and down BUT if i clamp the top of the blade in the clamp on the end of the arm the blade wont go up and down and it sounds like they motor is stalling. so if anybody knows anything about these or what make it might be so i gan google it I would be grateful
![20220921_150413.jpg 20220921_150413.jpg](https://cdn.imagearchive.com/ukworkshop/data/attachments/125/125907-a844ac1b70128e88d8bf5d04de944581.jpg)
![20220921_150429.jpg 20220921_150429.jpg](https://cdn.imagearchive.com/ukworkshop/data/attachments/125/125905-f352fda35d81b3b60f765949f50d9fa0.jpg)
![20220921_150432.jpg 20220921_150432.jpg](https://cdn.imagearchive.com/ukworkshop/data/attachments/125/125906-f4661da5fb4d6ce0d74b77b62a75434c.jpg)
![20220921_150413.jpg 20220921_150413.jpg](https://cdn.imagearchive.com/ukworkshop/data/attachments/125/125907-a844ac1b70128e88d8bf5d04de944581.jpg)
![20220921_150429.jpg 20220921_150429.jpg](https://cdn.imagearchive.com/ukworkshop/data/attachments/125/125905-f352fda35d81b3b60f765949f50d9fa0.jpg)
![20220921_150432.jpg 20220921_150432.jpg](https://cdn.imagearchive.com/ukworkshop/data/attachments/125/125906-f4661da5fb4d6ce0d74b77b62a75434c.jpg)