August Challenge - A cup and Saucer

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nev

Established Member
Joined
21 Jan 2011
Messages
4,860
Reaction score
16
Location
The green and wetter end of the M4.
As simple or complex as you like, a cup and saucer.

Usual rules:
Open to anyone and everyone.
New work only please.
To be made on the lathe using wood turning tools.
no minimum or maximum size.

Can be made of multiple woods if desired
Decoration, colouring, texturing is allowed, but again remember its about the turning :wink:

Please post 3 or 4 images of your work along with a brief note about how you made it, what tools and finish you used, what wood (if known) and the objects dimensions etc.

1 showing a general view
1 showing a top down/ internal view (of the cup)
1 showing an underside view of cup and saucer
1 optional photo showing any other feature you think might be of interest

Image size please use image size 640 x 480 0.3 mp, same previous months

Please upload your pics and description between ..

10pm on the 26th
and
10pm on the 28th

After this time the thread will be locked for Judging
Results will be given on or around 30th

This months judge will be Richard Findley.

Any entry's that are outside the rules and requirements will not be judged
The Judges decision is final ( Any negative comments re judging must be via PM only and not on the open forum )
NO Critique or comments on any work until After the Judging and results please.

Any questions please post them in this thread. Have fun! and just a reminder ANYONE can join in.

The monthly challenge roundup
 
Back
Top