PeteG
Established Member
I couldn't sit around with my butt glued to the chair, and although I was going to make this before my accident,
I decided to get on with as a thank you for our lass looking after me last week. I was hoping to have it finished in a day,
but everything took longer than anticipated and I'm completely knackered.
It's made from Ash, finished width of the timber is 38 mm, I cut about 20 mm off which I did on the scroll saw. Took a while
in comparison to the T/S but I got there. I also cut the lap joints on the scroll saw, and used the Domino to join the sections.
I'll glue up tomorrow, give it a final sanding and then a few coats of oil, and take a few more piccies![Big grin :D :D](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
I decided to get on with as a thank you for our lass looking after me last week. I was hoping to have it finished in a day,
but everything took longer than anticipated and I'm completely knackered.
It's made from Ash, finished width of the timber is 38 mm, I cut about 20 mm off which I did on the scroll saw. Took a while
in comparison to the T/S but I got there. I also cut the lap joints on the scroll saw, and used the Domino to join the sections.
I'll glue up tomorrow, give it a final sanding and then a few coats of oil, and take a few more piccies
![Plant Stand WIP.jpg Plant Stand WIP.jpg](https://cdn.imagearchive.com/ukworkshop/data/attach/61/61502-Plant-Stand-WIP.jpg)