nod

I just finished making a new frame and door for my garage. I made the door oversized and then could plane it down to fit. I'd make it as...

I would put money on radio controlled plane Heli drone

Hi and welcome to ukw, you should be able to post pics but you may have to have so many messages 1st . Then just click ghe attach files...

Can’t fault CBN wheels apart from the cost….but they do last…

Hi I am a retired Joiner, Been sharpening tools over 50 years. You will find its not just the grinder you look at nowadays there are...

if you put a straight edge on the grind lathe chisel > Tip = Cutting edge edge, To the heel. or & on a flat chisel both ways from tip...

Have you not got a bump in the middle of the grind mud

All now Phil. Flat chisels. Plane irons. Lathe tools.

guarantee Depends on what stone you have on & what Finnish you want. I have used a 6" dry grind for all my irons much faster but does...

My obsession with quirky lights continue :lol: Researched by watching miley cyrus wrecking ball video.

I have had the Robert Sorby lasted with me few weeks, Then sold it. Very good idea but lots of work need to be Dunn before it comes up...

The Back Plate needs adjusting as far back as you can.

If the Sorby Pro Edge is anything like the Axminster Ultimate edge then you should be able to adjust the position of the platen. Edit...

Same here lofty. But just started lathing in my retirment & finding out about all this new sharpening ideas, Got me curios & went for a...

I've been sharpening my turning tools on a Record 6" grinder fitted with a white and a pink stone for nearly 30 years and have never had...