RonnieI

I use a 70/20/10 mix of baby oil/beeswax/turpentine to rub on a piece before sanding. Rub on, rub off excess then sand, practically...

Makes a lot of sense. I have never seen a fence like this. Sounds if it is an after market item. I find if you look for twists, cupping...

Kickback is often caused by the wood misbehaving between the saw blade and the fence, usually after it has passed the centre of the...

Having the riving knife in place helps prevent the workpiece gripping the blade and getting lifted/thrown. Having the crown guard in...

Don't forget the back of the blade is rising and while not actually cutting it can pinch the sides of the cut and kick it up .Most...

I don't have a tablesaw, always fought shy of them but still use circular saws and a bandsaw🤔. But, I've always wondered, what is the...

Think it is because the solenoid contactor is pulling in and dropping out when the red button is pressed. Now I've had chance to do a...

Hi, I've had a myford mystro mk2 for about 6 months and today it just stopped. Pressing the green start button I can hear a relay clunk...