Steve Jones
Established Member
Finally managed to get some turning done yesterday first time since Dec 08. Unfortunately where I live in a housing association house they don't take to kindly to a garage being used for anything other than for keeping a car in, so my turning days and nights are now few and far between, and we have no space for a shed in the garden
.
Anyway enough of that, the bowl is around 11" in diameter and 2 1/2" thick finished with a cellulose sanding sealer and 2 coats of clear woodwax 22. I was a bit limited on the design of this bowl as the customer had seen one I had turned last year and wanted one ' like that ', she also wanted spalted beech but I wasn't able to get anything decent locally so went with the sycamore instead.
Comments welcome
Steve![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Anyway enough of that, the bowl is around 11" in diameter and 2 1/2" thick finished with a cellulose sanding sealer and 2 coats of clear woodwax 22. I was a bit limited on the design of this bowl as the customer had seen one I had turned last year and wanted one ' like that ', she also wanted spalted beech but I wasn't able to get anything decent locally so went with the sycamore instead.
![3675130454_5454469ece.jpg](https://proxy.imagearchive.com/48e/48e472acb27cb93353a7b5baf36c1804.jpg)
![3675130802_5d29a9e05f.jpg](https://proxy.imagearchive.com/d7d/d7da8d526337840e99049dad80ee589e.jpg)
![3675130454_5454469ece.jpg](https://proxy.imagearchive.com/48e/48e472acb27cb93353a7b5baf36c1804.jpg)
Comments welcome
Steve