Sedgwick CP bearings

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Stokes&co

Member
Joined
1 Sep 2021
Messages
11
Reaction score
7
Location
Brighton
Hi all,

Just wondering if anybody can tell me what bearings I need for a Sedgwick CP planer thicknesser. It is a 3 knife straight block and it is a dark blue and light blue machine (for the age).

Any pointers as where is best to buy them would be great too!

Thanks in advance,

Patrick
 
I can't help with the CP bearings but they will be a standard bearing, readily available from Simplybearings or Bearingboys online. Pull it apart and the numbers should be engraved on the sides of the old ones.

Take a look at this thread for a full overhaul of an older versison of the mid range MB model. The MB and CP are very similar, only really differing in size.

https://www.ukworkshop.co.uk/threads/sedgwick-mb-planer-thicknesser-full-refurbishment.136008/page-2

Post #34 or thereabouts for the beginning of photos of the cutter block and it's bearings.
 

Latest posts

Back
Top