Kity 619 Table Saw

[AndyC Longwood]

A few quick questions for anyone who's got one/used one:

Any advice/information on adjusting the sliding table?

Can the blade alignment be adjusted? Not sure its running parallel with the mitre slot!

Can this machine use a dado cutter?

Any help much appreciated,

Andy

 

[Dibs-h]

A few quick questions for anyone who's got one/used one:

Any advice/information on adjusting the sliding table?

Can the blade alignment be adjusted? Not sure its running parallel with the mitre slot!

Can this machine use a dado cutter?

Any help much appreciated,

Andy

Dado - I'd say no.

Dibs

 

[János]

Hello,

the saw aggregate was screwed to the table, so you would be able to adjust it in relation to the mitre slot/slots (the saw have two of these), after slackening the holding screws, I think.

As far as I know, you should not, and can not use grooving cutters/dado blades/wobble saws; they are illegal in Europe, and they can not be fitted to the arbor of this Kity saw, as the arbor was made short intentionally.

By,

János

 

[JMcK]

You cannot use a Dado with the Kity 619 as it is braked. There was a discussion previously about them being braked. Mine definitely is.