Search results

I have no experience with this seller but have some jorgensens that I bought years ago. http://www.rollins.co.uk/pony-jorgensen ... Clamp-4343 Regards

I guess mine is an earlier model sxe 450 Duo. Probably exactly same as the turbo model.

I use a metabo duo. 150mm . smooth finish relatively quiet and I usually use with one hand on the level. Variable speed helps to keep the vibration down as well.

I keep my eyes peeled for these 2nd hand on ebay and the don't come up too frequently now. After a couple for spindle and drill mounted ones. Good luck if you're restarting and please drop me a PM here when you have some stock available. A website shouldnt cost too much to set up for UK Europe...

I find it excellent . I've been using a Soundbridge Roku and Logik for the last 8 or 9 years. As long as your Wifi is good no probs. With the Logik the Wifi was an internal USB stick and I changed it to an ethernet dongle . Both worked well. Also have an app ( UK Radio) on my phone as well. As I...

You gave it away when you said it trumps the Caterham. :)

Lotus esprit maybe

Mine is on right side of the infeed table. Take a look at the manual it has some info on setting blades. So when you adjust or insert the blades they should barely touch the ruler/straight edge which you use on the outfeed table when setting it. Danny

I have one of these and it can easily be done. You probably need to adjust the two height screws that fit into the two slots on the blade down quite a bit before retightening all the bolts that should hold the gib in. Also make sure you get rid of all the resin that builds up in the vicinity...

Probably Marunaka. If you have the money for a machine it should give you near as damhikt perfection. :D

A few years ago borrowed rented a friends graco airless spayer to spray a clients house exterior. Pebbledash finish and new dark colour. But did the whole house and walls in 2-3 days. As was dark red over old yellow colour had to do severel coats from different directions to penetrate the...

Unknown to me but what is interesting is it says its a molder!!! 100 euro is nothing for UK and Finland too I expect. Worth a punt I'd have thought. Danny

There hasnt been any real rain for over 2 months here and this last week has been HOT, like really hot. Yesterday was about 40 in the shade . Can someone send some rain and cool here. :)

STeve has hit the nail on the head. You need at least one known angle or another hypotenuse between 2 of the sides.

Wot Rorsach said

Ah now I see pics it makes more sense what you're trying to do. On the drilling , sharpening thing not sure what the prob is, I watched a vid on youtube from Ave recently and as long as the flutes are clean and a drop of oil to lubricate then should be ok, if the angles of sharpening are good...

That sounds like a lot of metal to remove with a drill. I am no expert but I would probably try a decent holesaw, make sure you keep the swarf cleared more or less constantly with an airline. Other methods might be if you have a friend with a plasma torch. I am guessing the hole will be covered...

I definitely recommend preprimed. Over the last couple of years have had to do a customers house and they had bought raw mdf. There is no primer available here so used watered down latex and PVA mixed into it. If you can get it use Zinser to prime then 2 or 3 coats gloss. The curved bits of the...

Hi Simon, I too spotted Ishitani a couple of days ago. Very enjoyable to see the quality work there. Danny

Wow,that is expensive from both those retailers. Its made by other companies now. Last year I was paying about £4 a litre for the Glyphosate copy. Just as good as roundup. Im sure there are alternatives in the UK.